Hello to all! First and foremost, thank you all for the incredible amount of work from all the community, the end product/service are amazing.
We have an e-NV200 40kWh (MY18). For the most part, the most important features are working, but I would like to see if I could help the members who are developing the Leaf/eNV-2000 code to solve some important issues.
The main problem I'm having is with wrong voltages in the high-voltage subsystems, related to charging, both on AC and DC.
On AC charging, OVMS is showing me the right amperage (25A vs ~25,4A measured), but it always shows 179V instead of the separately measured 215V. Therefore it thinks the AC stack is getting ~4.5kW instead of ~5.5kW.
On CHAdeMO, it is showing 230V@92A (~21kW), when the rapid charger was supplying 43kW. In this case, I believe both the amperage and the voltage are wrong.
Is there anyone working on this I could assist with measurements to fine tune the PIDs scaling for this vehicle?
Thank you in advance!